Welcome to Shenzhen Nuo Heng Xing Technology Co., Ltd


Contact Us

You are here:Home >> Knowledge


Industrial endoscope camera’s usage

Time:2014-08-06 Views:126
Industrial endoscope camera’s usage

How to use industrial endoscope camera correctly. Most of people think it is easy, just do it under the guide of user manual. It is not enough. 

First of all, we have to choose from the following factors:
1.The path of the detection location: The path mainly refers to what is the trend of the object being detected, whether it is curved or linear. If it is curved to reach the bottom, then the fiber borescope or industrial electronic video endoscope camera should be selected. If it is linear, it must be a rigid endoscope camera.

2.The diameter of the object to be inspected: Before testing, we should investigate the size and diameter of the object, and then select the suitable diameter of the endoscope camera according to the size of the object’s diameter. These factors need to cooperate with each other.

3.Depth of the object to be inspected: During the testing, we must select the length and depth of the object to be tested to select the length of the reel in the corresponding set. The length of the general winding is 20/60m.

4. The size of the defect profile of the detected object: the defect profile includes the crack of the entire object to be inspected, the place where the deformation is made, and the place where the foreign matter is accumulated. This is an important basis for determining the viewing angle and the brightness of the light source in the internal detection. In the case where the object is too long, these parts may not be on the same flat, so there must be sufficient focusing function on the top of the selected endoscope camera.

Precautions of Industrial endoscope camera

First of all, we should pay attention to the external conditions and the operating environment of the hand-held industrial video endoscope. When in using, the users should avoid to use it in an explosive environment, such as the presence of flammable liquids and gases in the environment. When there are charged objects such as high-voltage wires around, the user should power off firstly. otherwise the metal parts exposed by the hand-held industrial endoscope are electrically conductive, causing the user to be shocked. Of course, we should try not to use the endoscope around the heat source with too high temperature. The area must be cleaned and illuminated.

Secondly, we should pay attention to the operating precautions of hand-held industrial video endoscopes. When using, do not over-stretch and bend the insertion tube, regardless of when, it should be balanced within the elastic range of the insertion tube. When using it, you should be as careful as possible. When using it, the hand-holding force should be controlled and moved slowly to avoid damage to the instrument caused by excessive force.

Finally, we should pay attention to the maintenance of hand-held industrial video endoscopes. After using, we should wipe the probe and the body of endoscope camera with a dry cloth to prevent the residue to erode the instrument. After wiping, wrap it in a box and store it in safety place. Do not store it in a damp place.

When the hand-held industrial video endoscope needs repair, contact the dealer or manufacturer NUO HENG XING and have it checked by a professional service technician. Non-professionals should not disassemble and attempt to repair, so as not to damage the instrument.